Product Overview

 Power Bank is the perfect accessory for any WISP technician or wireless engineer. 

       Power your devices with USB-A, USB-C, 24V PoE, and PoE++ (802.3bt).
 Carry 26400 mAh of power with you up a tower to remotely power your devices.
 The Power Bank is temperature resistant and also features protection from various
 factors such as input overvoltage, 

       output overvoltage, short circuit, and incorrect insertion.



 USB-C (In/ Out)

 USB-A (Out)

 24V Gigabit PoE(Out)

 LAN (In)

 PoE++ 802.3af/at/bt (Out) LAN (RJ45 Gigabit)

 PoE Output: 802.3af/at/bt 24V Gigabit PoE

 USB-A Output: 5V/3A,9V/2A,12V/1.5A 18W (max.)

 LED: Battery Indicator Light (100%, 75%, 50%, 25%) USB-C (Input/ Output)

 USB-C Input: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3A

 USB-C Output: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3A,PPS 3.3- 21V/3A

 Battery Type: Lithium Polymer Battery

 Battery Capacity: 26400mAh/ 98Wh Recharging Time: 3Hrs



Operating guide

❆  Use provided USB-C wall charger and USB-C to USB-C cable to connect VenVolt to USB-C charger. Be sure to fully

     charge your VenVolt before your first use. The battery is shipped under 30% due to regulation requirements.

❆  Charging typically takes 3 to 4 hours to fully charge

❆  Charging device PoE Device

❆  To power a PoE device use your own ethernet cable to connect from VenVolt to your device.

❆  Move select switch from Off to 4 for PoE++ port

❆  Move select switch from Off to 3 for 24V Gigabit PoE port

❆  USB-C port is disabled if switch is set to 3 or 4

❆  Charging laptop or phone with USB-C port:

❆  To power a USB device use included cable or your own cable

❆  Move select switch to Off

❆  Battery will automatically detect a device has been connected and charging will begin.

❆  Charging a device via the USB-A port:

❆  The USB-A port is on when select switch is set to 3 or 4. When the select switch is set to OFF only the USB-C port is active.

Safety Precautions 

❆  Do not expose the product to fire or other high-temperature environments. The recommended usage temperature is between 14 

     degrees F to 113 degrees F.

❆  Do not expose the product to water

❆  Stop using is any of the following conditions occur: electrolytic liquid leakage, overheating, color change, or other unusual conditions.

❆  Do not short circuit the positive (+) and negative (-).


❆  Do not expose the VenteVolt 2 to direct sunlight for long periods of time or leave it any place with high temperature or high humidity.

❆  Discharge and recharge the VenVolt2 periodically if you don’t plan to use it for an extended period of time.


PoE Powerbank-Datasheet.png